3
Data System Instrument Configuration
Configuring an Accela Instrument in ChromQuest
Thermo Scientific
Accela Pump Hardware Manual
33
6. Configure the Accela Pump options:
a. In the Configured modules pane, double-click the
Accela Pump
button.
The Accela Pump Configuration dialog box appears (see
Figure 27
).
Figure 27.
Accela Pump Configuration dialog box (ChromQuest)
b. In the Default pressure units list, select the pressure units that you prefer:
bar
,
PSI,
or
MPa
.
c.
Click
OK
to accept the entries and close the Accela Pump Configuration dialog box.
7. Configure the Accela Autosampler:
a. In the Configured modules
pane, double-click the
Accela AS
button.
The Accela AS Configuration dialog box appears.
b. Make the appropriate selections and entries.
c.
Ensure that the
Inject when Inject Hold signal is "Off"
check box is selected (see
Figure 28
).
Note
In ChromQuest 5.0, the Accela Pump Configuration dialog box includes a
Handle Degasser Feedback check box. This feature is reserved for future use.
IMPORTANT
If the Inject when Inject Hold signal is "Off" check box is not
selected, the system remains in the Waiting for Download state.
