Testing transistors:
Set the rotary switch to
hFE
measurement mode.
Check that the transistor is PNP or NPN type.
Insert the Insert the transistor to be measured to the
corresponding
Transistor Jack
The Meter displays the tested transistor’s nearest value
When transistor measurement has been completed,
disconnect the connection between the test clips and
the circuit under test and remove the test clips from the
input terminals of the Meter.
l
Model 72-8155: OPERATING MANUAL
18
E. Transistor hFE Measurement
(see figure 7)
(figure 7)
1.
2.
3.
4.
Note:
Содержание 72-8155
Страница 2: ...Model 72 8155 OPERATING MANUAL 2 ...