Tenma 72-8155, Руководство по эксплуатации, Страница: 11 / 26

Make sure the Low Battery Display is not on,
otherwise false readings may be provided.
Pay extra attention to the symbol, before
measurement, which is located besides the input
terminals of the Meter.
l
l
To avoid damage to the Meter or to the devices under
test, disconnect circuit power and discharge all the
high-voltage capacitors before measuring resistance.
Warning
The resistance ranges are 20 , 200 , 2k , 20k , 200k ,
2M , 20M and 2000M .
Insert the red test clip into the terminal and
the black test clip into
COM terminal.
Set the rotary switch to range.
Connect the test clips across with the object being
measured.
The measured value shows on the display.
1.
2.
3.
To measure resistance, please connect the Meter as
follows:
Model 72-8155: OPERATING MANUAL
11
Measurement Operation
A. Measuring Resistance
(see figure 3)
(figure 3)