Tenma 72-8155, Руководство по эксплуатации, Страница: 16 / 26

To minimize the effect of capacitance stored in the test
clips, the test clips should be as short as possible and
use the small value jack when measuring small
capacitors.
The Meter cannot check the quality of the capacitor.
Stable and solid connections are essential when
measuring large capacitors.
When the tested capacitor is leaking or damaged and
the tested value is not stable, the capacitor may have
problems. You need to use other tools or equipment to
check and confirm.
When capacitance measurement has been completed,
disconnect the connection between the test clips and
the circuit under test and remove the test clips from the
input terminals of the Meter.
l
l
l
l
Model 72-8155: OPERATING MANUAL
16
Note