Manual LoRaWAN CO
2
stoplicht
7
©
Copyright
2021
Teneo
Sales
BV.
All rights reserved.
All information in this manual Is subject to change without further notice.
+31 (0)543 535 535
3.1. Preparation
Warning!
In case of extreme heat (temperature > 70 °C), the node may be damaged.
Therefore, do not use hot air heating sources near (< 1.5 meters) of the sensor.
The CO
2
stoplicht is supplied with USB-A to micro USB cable. A 5 V USB power supply can then be used
for this, this 5V power supply is not included with the stoplicht.
In the photo below you can see the contents of one box of CO
2
stoplicht.
Figure 2: Contents box CO
2
stoplicht.
3.2. Installation/Assembly
The CO
2
stoplicht can be placed on the tables or surfaces, but in addition, the CO
2
stoplicht with the
supplied wall mounting bracket can also be attached to walls or other surfaces.
For mounting the wall bracket and attaching the stoplicht there is a square hole in the back of the stoplicht,
through this square hole the CO
2
stoplicht can be hooked to the wall bracket.
On the next page of this manual we see with photos an explanation of how exactly the stoplicht can be
fixed.
3. Operation
Содержание LoRaWAN CO2 stoplicht
Страница 1: ...Manual LoRaWAN CO2 stoplicht Version 2 0 ...
