TENEO LoRaWAN CO2 stoplicht, Руководство пользователя

Страница: 6 / 20

Manual LoRaWAN CO
2
stoplicht
6
© Copyright 2021 Teneo Sales BV. support@teneo-iot.nl
All rights reserved.
All information in this manual Is subject to change without further notice.
+31 (0)543 535 535
2.1. Product description
The LoRaWAN CO
2
stoplicht is a product that measures CO
2
level, temperature and humidity and transmits
these measured values via the LoRaWAN wireless communication network.
In addition, the CO
2
stoplicht has LEDs that change color when the measured CO
2
value exceeds a certain
threshold.
On the basis of this direct feedback by the LEDs, (extra) can then be ventilated, to ensure that the air
quality in the measured room returns to the desired level.
The thresholds are based on the requirements for CO
2
meters according to Article 3.5 of the Bouwbesluit
2012 from the Netherlands 1 , but can also be adjusted remotely by means of a downlink.
2.2. Product specifications
Category: Part: Specification:
Physically Dimensions: H: 166 mm, Ø: 85 mm
Material: ABS
Weight: 310 grams
IP-rating: IP 20
Conditions of use Temperature: - 20 °C to 50 °C
LoRaWAN Transmission power: 14 dBm
Class: A (baseline)
Activation method OTAA
Frequency EU 868 MHz (863 – 870 MHz)
Encryption AES128
Power Supply 5V DC
CO
2
sensor Sensor: SCD30 (Sensirion)
Measuring range 400 ppm – 10,000 ppm
Accuracy ± 30 ppm
Humidity sensor Measuring range 0% - 100% RH
Accuracy ± 3% RH
Temperature sensor Unit Celsius
Measuring range - 20 °C - + 50 °C
Accuracy ± 0.5°C
1 Source: https://rijksoverheid.bouwbesluit.com/Inhoud/docs/wet/bb2012_reg/hoofdstuk-3/artikel-3.5
2. Introduction