How to Use EDGEVue and EDGECloud
29
Load a template
Used to load a previously-saved mission template (if
available) by tapping in the field and choosing a
template name from the pull-down list.
Module name
Create a name for the module during the mission
(up to 18 characters). This name is displayed
throughout the application when referring to the
module.
Reading interval
Set the temperature read and record frequency for
the module sensor. Tap to choose values in minutes
or seconds.
Note
: To activate
Low/High delays
in the
Alarms
tab,
Reading interval
must be set in minutes (see
below).
Datalogging in
Up to 4,000 readings can be stored in module
continuous loop
memory. To continue datalogging after this limit is
reached, the oldest readings can be overwritten by
new readings by selecting
Datalogging in
continuous loop
. Otherwise, datalogging stops
when the limit of 4,000 readings is reached.
Save as template
On completion of establishing mission settings,
select
Save as template
at the bottom of the screen
if you want to save the current mission as a
template for future use.
