3. Enter
*
To check to status of the relay (
Input GuardR only)
1. From the main menu press
1
2. You will hear “
Enter Input”
3. Enter
#
4. You will hear the status of the relay
Connecting the Input Guard to a Phone Line which has
a fax or answering machine connected to it
Program the Input Guard to answer after one more ring than
the other device. This allows the other device to always answer
first.
To call and access the Input Guard
1. Dial the phone number
2. Hang up one ring before the other device answers.
3. Wait no longer than 30 seconds, then dial the phone
number again.
4. The Input Guard will answer.
Example:
A fax machine on the same line as the Input Guard is set to
answer after 4 rings.
The Input Guard is programmed to answer after 5 rings.
To access the Input Guard, dial the number, let it ring three
times, then hang up. Wait 20 seconds and call again. After two
rings, the Input Guard will answer.
Verifying that the Input Guard works with your phone
line
To verify that the Input Guard works with your phone line,
perform the following test.
1. Using another phone line, call the Input Guard and
verify that it answers the phone
2. From the Main Menu, press
2
to setup inputs
3. Press
1
to setup input 1
4. Press
1
to make this input normally closed
5. Program a time delay of 0 minutes (See
Input Setup
)
6. Skip the input ID message recording for now.
7. Program the phone number you are calling from into
14
Содержание Input Guard VM500-6
Страница 4: ...4 Wiring diagram 1...
