Temperature Guard Input Guard VM500-6, Руководство и инструкции по установке

Страница: 7 / 18

(i.e. 0 minutes)
7.
You will hear "Press 1 to change"
8.
Press 1 to change the delay or press any other
button to not change the delay. (If you do not press
one, go to step 12)
9.
You will hear “ Enter number then press pound”
10.
Enter the time delay in minutes (Valid times are 0 to
999 minutes), then press
# .
11.
You will hear the value you just entered (i.e. 5
minutes )
12.
You will hear the programmed identification message
for the selected input
13.
You will hear “Press 1 to change”
14.
Press 1 to make a change or press any other button
to not change the message (If you do not press one
go to step 19)
15.
You will hear a tone
16.
Begin speaking after the tone. The Input Guard will
record for about 4 seconds
17.
After 4 seconds you will hear the tone again, marking
the end of your message
18.
You will hear the message you recorded
19.
You will be returned to the Input Setup Menu
Repeat the above steps for each input used.
Program Menu Items
To access the Program Menu:
1. From the Main Menu, press 3
2. You will hear the Program Menu options (you
may enter your selection at any time):
1. Primary Number
2. Secondary Number
3. Third Number
4. Fourth Number
5. Local ID
6. Personal Identification Message
7. Number of Rings
8. Change PIN number
7