Temperature Guard Input Guard VM500-6, Руководство и инструкции по установке

Страница: 15 / 18

15 15
the first phone number location. (See Programming
Telephone Numbers )
8. Press ‘0’ twice to exit the Program Menu and hang
up the Input Guard
9. Remove the terminal blocks to ensure input 1 will be
open
10. The Input Guard will close the alarm relay, sound the
buzzer, and call out because input 1 is programmed
to be normally closed and is currently open
If the Input Guard does not answer the phone
Verify that the phone line is working. Connect a standard
phone to the line intended for the Input Guard. Verify that there
is a dial tone.
Check that the phone line is plugged in securely.
Verify that the Input Guard is powered up and the status light is
blinking.
If the Input Guard does not call out
Verify that the phone line is good. Connect a phone to the line
intended for the Input Guard. Verify that there is a dial tone.
Check that the phone line is plugged in securely
Verify that the Input Guard is powered up and the status light is
blinking
Verify that the Input Guard is programmed correctly. Call up
the Input Guard and verify the programmed phone numbers
and inputs setup.
Optional 20 / 30 Hour Extended Batteries
If your unit has been ordered with an extended battery, it is
installed at the factory. These batteries are trickle charged and
can take up to a week to reach full capacity. The battery is
charging whenever the monitor is powered on.