9. Program Reminder Call
0. Exit (return to Main Menu)
Programming Telephone/Pager Numbers
The Input Guard stores up to four (4) emergency telephone or
pager numbers. The Input Guard will call each phone number
until the PIN number is entered. If Input Guard reaches an
answering machine, it will leave your personal identification
message, and then the alarm condition, but will continue calling.
First Time Number Programming:
1 From the Program Menu, Select
1
for the primary number,
2
for the secondary number,
3
for the third number, or
4
for the
fourth number.
2
You will hear “
Enter number then press pound”
3a For voice phone numbers enter the full phone number
(1 + area code if necessary)
followed by the
#
key.
3b For pager numbers enter
*
then enter the full pager number
(1 + area code if necessary)
followed by the
#
key.
4 You will hear the telephone number you just entered.
5 You will be automatically returned to the Program Menu
Note:
If an extra delay between digits is required, entering * will
provide a two second delay. Do not enter * for the first digit
unless programming a pager number.
To program the second, third, and fourth numbers repeat above
steps, entering 2, 3, and 4 respectively from the program menu.
To Change a Phone Number:
1 Select the phone number to change from the Program Menu
2 You will hear the selected telephone number
3 You will hear “
Press one to change”
4
Press
1
to change
5
You will hear “
Enter number then press pound”
6a For voice phone numbers enter the full phone number
(1 + area code if necessary)
followed by the
#
key.
6b For pager numbers enter
*
then enter the full pager number
(1 + area code if necessary)
followed by the
#
key.
7 You will hear the telephone number you just entered.
8
Содержание Input Guard VM500-6
Страница 4: ...4 Wiring diagram 1...
