P a g e
|
13
TEMELSAN MAKİNA SAN. VE TİC. LTD. ŞTİ.
Akçaburgaz Mah. Muhsin Yazıcıoğlu Cad. No:55/1
Esenyurt
/ İstanbul / TÜRKİYE
TEL: +90 (212) 544-2518 FAX: +90 (212) 577-6557 www.temelsan.com [email protected]
PRESS-AIR REQUIREMENTS
The machine needs dry and clean air pressure, which needs 6-8 bars.
After some time the air becomes wet and dirty, then please clean the conditioner of air right
behind the machine.
Connect air hose supply coming from the compressor through at the rear side of the machine.
FIRST INSTALLATION AND ADJUSTMENTS
Authorized professionals, who must read this user guide, must do first installation and
adjustments. In case of questions, is an immediately contact with manufacturer/supplier
required.
FIRST CLEANING
Unpainted parts on the machine are slushed with conservation oil and have to be cleaned
before the operation can start. Especially the jaws and around them must be cleaned properly.
Check Points
1.
Power is connected through the instructions above, All fuses are ON also inside the
electro cabinet
2.
Air is connected and adjusted with 8 Bar
EMERGENCY STOP BUTTON
OPERATOR KEYBOARD
HAND WHEEL FOR JAW SPACING
ELECTRIC CABINET
MAIN POWER SWITCH
JAWS
BLUE START BUTTON
RIGHT SIDE CLAMPING HANDLE
LEFT SIDE CLAMPING
HANDLE
