P a g e
|
27
TEMELSAN MAKİNA SAN. VE TİC. LTD. ŞTİ.
Akçaburgaz Mah. Muhsin Yazıcıoğlu Cad. No:55/1
Esenyurt
/ İstanbul / TÜRKİYE
TEL: +90 (212) 544-2518 FAX: +90 (212) 577-6557 www.temelsan.com [email protected]
CLAMPING JAW CALIBRATION BY CARBON PAPER
The calibration by Carbon paper brings more precision and is to use frequently after
several position changings but for sure after Jaw replacement.
1.
Position the Jaw Blocks to Annealing Ready Position
2.
Place the carbon paper package between jaws
3.
Clamp both Jaws and wait few seconds
4.
Take out the carbon paper package and study the picture
5.
Adjust the jaws until you gain similar clamping picture over all width of both jaws
6.
Place an 27mm Band, run an Annealing and watch where the heat starts,
back edge or teeth edge side, depends adjust both Jaws to center the heat
start to middle of Band.
Carbon Paper Sandwich
The Carbon Paper Print is showing similar print picture on both clamping jaws as an
perfect similar adjustment.
Left and right Jaw are not correct adjusted
WHITE PAPER ON TOP
WHITE PAPER ON BUTTOM
CARBON PAPER BETWEEN
