Temelsan KN-40 S-MN, Руководство пользователя

Страница: 32 / 50

P a g e | 31
TEMELSAN MAKİNA SAN. VE TİC. LTD. ŞTİ.
Akçaburgaz Mah. Muhsin Yazıcıoğlu Cad. No:55/1 Esenyurt / İstanbul / TÜRKİYE
TEL: +90 (212) 544-2518 FAX: +90 (212) 577-6557 www.temelsan.com temelsan@temelsan.com
QUICK MANUAL CHART
Follow the steps and run a successfully weld!
1.
Switch ON the
“Main Power Switch”
• Press “BLUE RESET BUTTON”
2.
Push the
“Welding Ready Button”
3.
Select the Program # at Operator Panel
4.
Select the
“ Band Width”
at Operator Panel
5.
Adjust the
“ Welding Space”
by hand wheel
6.
Adjust the
“
Up-
Set Pressure”
by hand wheel
7.
Push the
“ Annealing Ready Button”
the Jaws will move
8.
Adjust the
“ Stoppers”
for right tooth gullet deepness
9.
Adjust the
“Outside Stoppers”
(outside stoppers 2x
≈+0,1mm)
10.
Run the
“ Jaw Level Calibration”
read manual
11.
Push the
“Welding Ready Button”
12.
Position a band, Clamp the Jaws
13.
Press start button for welding
14.
Unclamp the jaws and press
“Annealing Ready Button”
15.
Position a band, Clamp the Jaws
16.
Press start button for annealing
17.
Unclamp the jaws
18.
Let cool down your weld after machine has finisher the procedure
19.
Measure the high/low with Temelsan Camber measurement tool
20.
Grind carefully both side of weld
21.
Grind carefully the Gullet
22.
Grind carefully the back edge of band
23.
Test the Weld by Bending Tester from Temelsan
24.
If Weld quality has passed the Tests, Start your manufacturing