TELUS iR1200, Руководство по установке

Страница: 18 / 37

TELUS Mobility™
12 www.telusmobility.com
Mounted on side of console
Mounted on side wall of trunk
Mount the Modem
The following table lists the steps for mounting the iR1200 data modem in a mobile environment.
1 Determine a convenient location in the mobile environment.
2 Use the iR1200 modem and mark the positions of the holes on the mounting surface.
3 Drill the holes in the marked location.
4 Mount the unit using the #10 sheet metal screws.
Mounting the Antenna(s)
The location of the antenna should be chosen carefully.
!
Important things to consider when installing the antenna equipment.
•
Equipment must be installed in accordance with manufacturer’s
instructions
•
To ensure compliance with United States FCC regulations on RF
exposure, equipment must be installed in such a way as to maintain a
separation of at least 8 inches (20 cms) between the antenna and the
human body.
•
Ensure that the antenna is properly installed external to the mobile
environment and in accordance with the requirements of the antenna
manufacturer/supplier.
•
Use only an approved antenna. Unauthorized antennas, modifications or
attachments could impair call quality, damage the modem, or violate FCC
mandates.
Approved Antennas
For a list of tested and approved antennas that can be used with the iR1200 modems, please contact your authorized TELUS
Mobility
™
dealer, go to www.elutions.com/wireless or contact eLutions’ Wireless Support Center at 888-349-4338.
NOTE: Antennas with gain exceeding 5dBd (commonly specified as 3dB gain) do not comply with FCC RF exposure and
are not allowed for use with this product.
!
IMPORTANT: Only approved and tested components should be used with the
iR1200 modem. Use of unapproved components violates the modem’s
warranty.
Select Antenna Location
The following are some common layouts for co-locating an external antenna and the iR1200 modem.
•
Roof to trunk – This layout accommodates a trunk-mounted modem and antenna that is attached to the roof.
•
Trunk to trunk – This layout accommodates a trunk-mounted modem and antenna that is attached to the trunk.
•
Roof to console or dashboard – This layout accommodates a console or dashboard mounted modem and the antenna
attached to the roof. This setup gives you access to the modem.