TELUS iR1200, Руководство по установке, Страница: 34 / 37

TELUS Mobility™
28 www.telusmobility.com
Diagnostic Menu
The iR1200 modem Diagnostic Menu provides you with commands to help analyze problems with the modem. The menu
contains actions that call the modem and receive diagnostic information.
The following table outlines the types of information that can be retrieved with commands on the diagnostic menu.
Command Action Reply
1 – Reset
This command resets the radio
section of the modem.
2 – Master Reset This command is used when
certain changes are made to the
firmware and the modem needs to
acquire the changes. WARNING: We do not recommend that you perform this
command unless otherwise instructed by an eLutions’
Customer Care representative.
3 – Signal
Quality
This determines the quality of the
signal. Signal quality can be 0 – 100
4 – Signal
Strength
This determines the signal
strength of the modem. Signal strength can be 0 – 100.
5 – Packet Data
Registration
Information
This will check for packet data
registration status.
•
Service type: PACKET
•
VALID NEI: (IP Address of the Modem)
•
Registration Status: REGISTERED or
UNREGISTERED
•
MIP Registration Status: REGISTERED or
UNREGISTERED
6 – Channel
Information
This determines if channel data
has been obtained.
•
Area
•
RSSI
•
Channel
•
State
•
TX Level
7 – Stored
Parameters
This provides the modem’s preset
parameters.
•
Flow Control
•
Character Framing
•
Service Class
•
DTE-side Stack
•
WDS-side Stack
•
Mobile IP Activation
•
Mobile UP Registration Lifetime
•
Security Parameter Index
•
Home Agent IP Address
•
+WPNEI Prefix Length
•
Request Broadcast Datagrams
•
DCE IP Addresses
•
DTE IP Addresses
•
Data Encryption
•
Data Compression
•
Header Compression
8 – DNS IP
Address
Displays the address of the
Domain Name Server.
9 – Modem Pass-
Thru Mode
Allows you to issue Hayes
compatible AT commands to the
modem during diagnostic port.