Teltonika © 2010 All Rights Reserved 31 |
P a g e
Figure 36.
Device Management
The following actions can be taken in Device Management window:
Add.
Select a camera from available camera’s list at the bottom of the
Device
Management
window. Click
Add
. Enter IP address/Host name (domain name) and
port (default 8001) for the camera
Figure 37.
Add Device
Delete.
Delete selected camera.
Connect.
Connect to selected camera for configuration..
Config.
Configure selected camera.
Restart.
Restart selected camera.
Close.
Close the
Device Management
window. The added cameras appear in the
Device List
section in the right side of the Main Interface (Figure 35).
Refesh.
Refresh the camera list.
Set IP.
Change IP of selected camera.
Notes:
Camera and pc must be on the same network.
Default IP address is 192.168.0.233, gateway is 192.168.0.1.
