Teltonika © 2010 All Rights Reserved 12 |
P a g e
2.4.4
Network Configuration
Locate and run “IPCAM Network Setup” file from CD directory.
Select available camera in bottom field of a left column “Information about this computer”
Note:
In case if your camera is not in the list, try to connect it directly to you PC with the same
subnet.
Configure IP settings and enter Administrator password in a right column. Save your settings
by pressing “Save Settings” button.
Note:
Camera’s default IP address is http://192.168.0.233
Figure 6.
IPCAM Network Setup
2.4.5
OCX Plug-In Install
OCX plug-in must be installed for proper camera usage. Click the link at the bottom of Login
page and follow onscreen instructions. Remember to close the browser before installation.
Figure 7.
Link on WEB Login page
