35
SMS login and password and authorized number list are used to protect FM3622
module from unauthorized access. Module accepts messages only from a list of
authorized numbers and with proper module login and password. Numbers
must be without “+” or “00” prefix. If no authorized numbers are entered,
module accepts messages from all numbers.
5.12
GSM settings, Operator list
Operators list – FM3622 can work in different modes (use different settings) according to
the operator list defined. Operator list is used for Data Acquisition Mode switching (see chapter
5.13 Data Acquisition Mode settings for more details). Modes are changed based on 3G/GSM
operator FM3622 is connected to.
Figure 25. Operator list configuration
If operator list is left empty, it will allow using GPRS to any GSM operator. Please note that
FM3622 will work in
Unknown mode only
(make sure it is configured to allow data sending –
GPRS context is enabled).
5.13
Data Acquisition Mode settings
Data Acquisition Modes are an essential part of FM3622 device, it is also highly
configurable.
By configuration user defines how records will be saved and sent. There are three different
modes: Home, Roaming and Unknown. All these modes with configured data acquisition and
send frequencies depend on current GSM Operator defined in Operator list (see section 5.12)
and are switched when GSM operator changes (e.g. vehicle passes through country boarder).
If current GSM operator is defined as Home Operator, device will work in Home Data
Acquisition mode, if current operator is defined as Roaming Operator, device will work in
Roaming Data Acquisition mode, and if current operator code is not written in Operator list (but
Downloaded from
www.Manualslib.com
manuals search engine
