83
10
Module installation
Installing FM1000 module:
1) Locate OBD-II connector in your car
(see car owner’s manual for the location of
the connector);
2) Plug in FM1000 device in OBD-II connector or use optional extension cable
(Figure 37);
3) If status and navigate led lights turn on, device is ready to use.
Figure 38 OBD-II extension cable
Installation recommendations:
1) SIM card should be inserted in the module while the connector is plugged off
(while module has no power);
2) Please, make sure that the module is firmly embedded in the OBD-II connector or
optional extension cable (if there is not enough space for the device near the OBD-II
connector, an extension cable may be necessary, which can be ordered as an
accessory
–
not included in the package).