•
Get IMEI: reads AT1000 modem IMEI (International Mobile Equipment Identity) number.
Note, that after you connect device to power supply, it takes several seconds to load modem –
only then Configurator is able to read it. Otherwise it will be displayed as 'none'.
•
Device startup: click this button to test data acquisition and data sending. This feature initiates
position acquisition from the GPS satellites. After coordinates are received, data is sent to
server as defined in global parameters.
•
COM port: click this drop-down list to choose which COM port is used by AT1000 to connect
to PC. See chapter 4 to find out number of the port.
•
Refresh button: click it to refresh all available ports on PC. This button is used when you
connect AT1000 to PC while Configurator software is already launched, but it did not detect
Virtual COM Port yet.
Global Parameters
Global parameters are common settings for device and are used with every profile. These are
GPRS settings, GPS fix settings, SMS settings and general settings.
GPRS settings
•
Mode: select data transfer mode for GPRS connection – TCP/IP or UDP/IP;
•
APN: (Access Point Name) this is operator provided parameter and is used to open GPRS
connection in GSM network. Please contact your GSM operator to find out your APN.
•
Username: APN username used to open GPRS connection in GSM network. In some cases it
is not required and field is left blank.
•
Password: APN password used to open GPRS connection in GSM network. In some cases it
is not required and field is left blank.
•
IP: this is destination server IP address to which AT1000 is sending data using GPRS.
•
Port: this is destination server port number to which AT1000 is sending data using GPRS.
GPS fix settings
•
Timeout: AT1000 is using this time interval (in seconds) when trying to establish its location. If
it fails to do so in given time, device considers that GPS is not available at the moment.
SMS settings
•
Password: enter a password for all incoming SMS to the device. Device will discard all recieved
SMS with passwords that do not match the entered one.
•
Authorized numbers: a list of GSM numbers – AT1000 will read messages only from listed
number and discard all messages from other numbers. If no numbers are entered, AT1000 will
read messages from all numbers. The first number is server GSM number – it is used to send
SMS to server modem. Numbers have to be entered in international format without '+' sign.
15