Connecting AT1000 to PC
Figure 4. Connecting micro USB cable to AT1000
When AT1000 is connected for the first time to PC, you will be prompted with 'Found New
Hardware' window. Click 'Cancel' to stop automatic installation process. It is required to install
AT1000 drivers before connecting device to PC. More details on how to install the driver can be found
in the paragraph above (
2.3 Intalling the drivers
).
Figure 5. Found New Hardware window
Closing AT1000 device cover:
On closing AT1000 case, please pay full attention on mounting the rubber gasket. It MUST be placed
correctly into the groove to protect device from the surrounding environment. Make sure it is not bent
or not damaged in any other way:
10
