Data send
•
GPRS enable: enables or disables GPRS in this profile
•
Send Period: time interval in seconds, when device is trying to send recorded data to the
server.
•
Send week time: if 'Send Period' value is 0, then AT1000 uses this table to send records. You
can set the time in 10 minute intervals and choose weekdays to do it. The table is same as for
data recording ('Save week time' table).
•
Min. Saved Records: every time AT1000 makes attempt to connect to the server, it checks if it
has at least predefined number of records to send. If it has less records than the value of this
field, it does not connect to the server and waits for next attempt after time, entered in 'Send
Period' field or 'Send week time' table. If it has enough records, device connects to the server
and sends them.
•
SMS 24 enable: enables ability to send data as binary SMS containing max 24 records.
Destination modem number is entered in 'Authorized numbers' table, 'SMS settings' under
'Global parameters' menu. AT1000 uses this method when it is not allowed to connect to
server using GPRS due to operators listed in the 'GSM Operators' table.
Note: since AT1000 is designed to stay in sleep mode to preserve the battery, it establishes new
GPS connection every time it wakes up which takes some time. Acquire and send intervals may have a
small delay if 'Save Week Time' table or 'Send Week Time' tables are used.
Battery Settings
AT1000 is able to monitor battery usage as percentage using internal counter. When new
batteries are inserted, click 'Reset Counter' button to start calculating battery level from the beginning.
Do not reset the battery level counter if not inserting new batteries!
Click 'Refresh Data' button
to see current battery level.
Default settings
AT1000 has 3 preconfigured templates for 3 different tracking scenarios: tracking mobile
objects, tracking international objects and tracking shipping containers. Only essential values are
present, since server IP, geofence zones and some other settings are subject to individual configuration
for every case.
Scenario #1
Designed for mobile objects security:
•
While moving collect data every 20 minutes, send data every 1 hour;
•
While idle collect and send data every 24 hours;
•
If geofence zone crossed: collect data every 5 minutes and GSM modem is always online.
Expected battery lifetime is 3 months if object moves about 8 hours a day with no alarm
captured. Configuration for this scenario is hardcoded into default profile #1.
22
