7
Plug the power adaptor jack
into the socket on the rear of
the base and the power
adaptor into the main power
wall socket.
Plug the Ethernet cable
into the socket on the
rear of the base and
plug the other end into
any spare Ethernet port
on the router.
The telephone line cord will be pre-installed into the
socket on the rear of the base.
It is recommended to complete set-up (refer to
Section 3.1) before you plug the other end of the
telephone line cord into the telephone line wall
socket.
1
2
3
Wi-Fi router
Base
1.1
Installing the base
Note
The power adaptor with the smaller jack is for the base unit and the power adaptor
with the bigger jack is for the charger unit.
The base station must be connected to the mains power wall socket and the
Ethernet cable must be plugged into the router at all times. Use only the power
adaptor and telephone line cord supplied with the product.
Getting started
