42
a feW
UsefUl Bits
leD statUs inDiCations
The LED light on the front left hand side of your T-Box
®
indicates the status
of your T-Box using the following light patterns:
• Your T -Box is powering up: Flashing every second
• Your T -Box is switched on: Steady light
• Your T -Box is in standby mode: Low light
• Your T-Box is in sleep mode: Light pulses at low intensity every 3 seconds
• Your T-Box is receiving a remote control command: Flashing white quickly
• Your T-Box is in deep sleep: No light
•Your T-Box is waiting to be paired with a remote control: Light blinks 3 times in a
row, every 3 seconds
stanDBY moDe
Pressing the power button on the remote control will set your T-Box to standby.
You can press the power button to switch it back on.
Your T-Box will continue to manage your downloads and run scheduled
recordings while it’s in standby mode. It is recommended that you do not switch
off your T-Box directly at the power point as this can cause problems with the
hard drive of your T-Box in standby mode. If the power plug needs to be switched
off and removed please put the T-Box in SLEEP MODE.
After a period of inactivity, your T-Box will transition to standby mode based on the
time set in the power-saving mode within 'Display Settings' in the 'Settings' menu.
sleeP moDe
Pressing the power button on the remote control continuously for 3 seconds will set your
T-Box to sleep mode. A message will be displayed on your TV screen ‘Entering sleep mode,
please wait.’ This reduces the power consumption of the T-Box while it is not in use.
You can press the power button on the remote control to switch the T-Box back
on. Your T-Box will continue to manage and run scheduled recordings while it’s in
sleep mode. Any movie downloads will be paused until the T-Box powers up.
UPDates
If you keep your T-Box connected to the internet, it will be able to automatically
download and install any operating software updates as soon as they’re
available. (These downloads are unmetered on BigPond
®
broadband.)
If your T-Box is installing an update:
• Do not switch off your T-Box or press any buttons on your remote control
• The unit will automatically switch itself off and restart once the upgrade
has been completed
