Telpar MTP7632, Руководство по программированию

Страница: 31 / 97

Confidential MTP7632 Programming Manual
Telpar 800-872-4886 25 -
[Range]
[Description]
[Notes]
[Default]
Hex 1B 63 30 n
Decimal 27 99 48 n
n =0,1,2
Selects paper type specified by n as follows.
n Paper type
0 Continuous paper
1,2 Marked paper
If n selects 0, other settings are disabled.
n = 0
ESC c 1 nL nH
[Name]
[Format]
[Range]
[Description]
[Notes]
Set cutting position
ASCII ESC c 1 nL nH
Hex 1B 63 31 nL nH
Decimal 27 99 49 nL nH
0 ≤ nL ≤ 255; 0 ≤ nH ≤ 255;
N=(nL + nH x 256 )( If n<19,so n = 19)
Sets the cutting position to a place when marked paper is selected.
• Direction settings: feeding paper is front, reversing feed paper is back.
• The relationship between N and the cutting position is defined as below.
If n increase, the cutting position move backward
；
If n decrease, the position move
forward : n/8
（
mm
）
for 203DPI, n/12
（
mm
）
for 300DPI.
• When nL = nH = 255, the N saved to printer will not loss even when printer is turned
off/on.
ESC c 3 n
[Name] Select paper-end signal of paper sensor
[Format] ASCII ESC c 3 n
Hex 1B 63 33 n
Decimal 27 99 51 n
[Range] 0 ≤ n ≤ 255
[Description] Select paper sensor to output paper-end signal
• The definition of n bit is as follows ：
Bit 0/1 Hex Decimal Function
0 0 00 0 undefined
0 00 0 Paper-near-end sensor is not available 1
1 02 2 Paper-near-end sensor is available
2 0 00 0 undefined