Telpar MTP7632, Руководство по программированию

Страница: 66 / 97

Confidential MTP7632 Programming Manual
Telpar 800-872-4886 60 -
character or not, then process the first byte and the second byte if the code is for Chinese.
•When use Chinese GB18030 character set, the printer process the third and the forth byte if
the Chinese character is forth-byte code.
•The printer select Chinese character mode automatically when the power is turned on.
[Reference] FS . , FS C
FS - n
[Name] Turn underling mode off/on for Chinese character
[Format] ASCII FS - n
Hex 1C 2D n
Decimal 28 45 n
[Range] 0 ≤ n ≤ 2, 48 ≤ n ≤ 50
[Description] urn underling mode off/on for Chinese character, based on the value of the n ：
n Function
0, 48 Turn underline mode off for Chinese character
1, 49 Turn underline mode on for Chinese character
（
1 dot thick
）
2, 50 Turn underline mode on for Chinese character
（
2 dot thick
）
[Notes]
• The printer can underline all the character (including right and left side character spacing),
except the space by HT and 90 degree clockwise-rotated characters .
• When the underline mode for Chinese character is turned off, underline printing is no longer
executed, but the previously specified thickness is not changed, the default thickness is 1 dot .
• The thickness of underling will not changed even the size of character changes .
• It is possible to turn off the underling mode for Chinese character by
FS!, the last received
command is effective.
[Default] n = 0
[Reference] FS !
FS .
[ Name] Cancel Chinese character mode
[Format] ASCII FS .
Hex 1C 2E
Decimal 28 46
[Description] Cancel Chinese character mode
[Notes] • When Chinese character mode is canceled, all the characters are processed one
byte for one times as ASCII code.
• The printer select Chinese character mode automatically when the power is turned
on.
[Reference] FS &, FS C