Telpar MTP7632, Руководство по программированию

Страница: 77 / 97

Confidential MTP7632 Programming Manual
Telpar 800-872-4886 71 -
1D 2F 00
（
print downloaded bit image
）
1D 2F 01
（
print download bit image
）
1D 2F 02
（ print downloaded bit image ）
1D 2F 03
（
print downloaded bit image
）
1D 56 00
（ cut paper ）
4.3.3 Print and cut paper
To print in line mode, use command 0A. To print in page mode, use command 0C or 1B 0C （ do not clear
buffer
）
. Cut paper command is 1D 56 00 .
Examples
：
1B 4C
(switch to page mode)
1B 57 20 00 00 00 60 02 20 03
（ set print area in page mode ）
50 72 69 6E 74 20 49 6E 20 50 61 67 65 20 4D 6F 64 65 33 33 33
1B 0C
（
print without clearing buffer
）
1D 56 00
（ cut paper ）
1B 0C
（
print without clearing buffer
）
1D 56 00
（ cut paper ）
0C
（
print and clear buffer
）
1D 56 00
（
cut paper
）
4.3.4 Status check
User may check the printer status (normal or error) through either real-time status transmission
command or automatic status back function which can transmit status data to host automatically when
error (paper end, printhead open, cutter error, paper jam etc.) occurs.
1) Real-time status transmission
（
10 04 n
）
command
This command is automatically enabled when the printer is turned on or when error occurs after printer is
powered on. User may also use real-time command enable/disable command
（
1B 63 40 n
）
to turn on
/ off real time commands. When print with printer drivers, the real-time command is automatically
disabled by printer driver to avoid rubbish data from the printer. If user wants to check printer status with
real-time status transmission command after printing, it is necessary to enable the real-time command
first by using command 1B 63 40 n.
Note: do not check printer status during printing with printer driver due to following reasons.
a) If the status inquiry command is sent to printer in API mode through USB port, the printer will process
this command as normal bit image data and consequently cause abnormal printout.
b)
If the status inquiry command is sent to printer through serial interface and USB interface, the printer
will also process this command data as normal bit image data and consequently cause abnormal
printout.
2) ASB （ 1D 61 n ）
If the ASB command is enabled, the printer will automatically transmit a four-byte status to host when
error occurs or specified printer status changes.
How to obtain correct printer status in use of ASB ?