Telpar MTP-600 Series, Руководство пользователя

Страница: 24 / 45

TELPAR MTP-600 Receipt Thermal Printer User Manual
MTP-600 User Manual – Part No. 090102-0010 (Rev. B – 6/03) Page 18
4.2.7 Descriptions of Commands
4.2.7.1 Set Print Mode
ESC ! +n [1B 21 +n ]
+n
is defined as:
Bit 7 --- Not used.
Bit 6 --- Not used.
Bit 5 --- 0 = Double high print OFF.
1 = Double high print ON.
Bit 4 --- 0 = Double wide print OFF.
1 = Double wide print ON.
Bit 3 --- Not used.
Bit 2 --- Not used.
Bit 1 --- 1 1 0 0
Bit 0 --- 1 0 1 0
= 8 x 16 character typeface
= 12 x 24 character typeface
= 16 x 16 character typeface
= 24 x 24 character typeface
Both double wide and double high can be selected for any of the type
faces. When a printed line contains characters with different heights,
the characters are arranged so that bottoms of all characters line up.
Default = 01hex (12 x 24 matrix)..
4.2.7.2 Set Bit Image Mode
ESC +m +n 1 +n 2 +d1
∼
dn [1B 2A +m +n 1 +n 2 (data)]
Specifies and prints bit image graphics.
m=97dec (61hex = a) defines each dot received is printed
double wide.
m=98dec (62hex = b). defines each dot is printed as received.
n1 and n2 define the number of dot lines to be printed.
n
1 and
n
2
cannot both have a value of 0, it is an invalid expression. The range of
n
1 = 0 to 255dec. The range of
n
2 is 0 to 3dec.
The number of dot lines to be printed is (
n
1+256*n2).
Bit Image Mode Settings
Data bytes
required
per dot line
if
m
= 97
Data bytes
required per
dot line if
m
=
98
Printer Mechanism Dots
per
line
28 56 MTP-620 2” mechanism 448
36 72 MTP-630 3” mechanism 576
52 104 MTP-640 4” mechanism 832
Table 10 - Bit Image Mode Settings