Telpar MTP-600 Series, Руководство пользователя

Страница: 12 / 45

TELPAR MTP-600 Receipt Thermal Printer User Manual
MTP-600 User Manual – Part No. 090102-0010 (Rev. B – 6/03) Page 6
To load paper, turn on the power and feed the straight edge of the paper into
the paper guide. Once paper has been initially loaded, the paper feed button
may be used. Ensure that the paper is installed correctly and feeding properly
with the thermal side facing up.
If AUTOLOAD has been enabled by the ESC C 1 1 command, inserting paper
will result in the automatic loading of paper to the next black mark once it is fed
into the paper guide. See ESC EM
+n
command for amount of paper to be
automatically fed.
If using fan fold paper, the perforation or fold should be fed at least 1.27 mm
(0.05 in) past the cut line to avoid a jam at the cutter. The black mark may
extend across the full width of the paper.
Figure 3 Fan-fold Black Mark
Specifications
Figure 4 Side view of Fan Fold
See
4.2.4Top of Form Commands
for additional information.
2.3 Paper Jam
In the event of a paper jam condition do not force paper into the unit, or try to pry the
paper out of the unit, this may damage the thermal print mechanism. Caution should be
exercised when working next to the cutter mechanism, the blades are sharp and may
cause serious injury.
To release paper:
•
Move Head Up lever to right of Advance wheel to top position.
•
Lift cutter mechanism to “Open position (See
Figure 6 - MTP-640 with Cutter
Mechanism open
) Paper can be removed at this time. Once paper is cleared from the
mechanism, return the cutter assembly to its home position. Models MTP-620, MTP-
630 and MTP-640 all operated similarly.
•
Move Head Up lever to right of Advance wheel to the bottom position to return to
printing position.
2.3.1 Head Up Lever
The Head Up lever is located by the Paper Feed knob. The down position is
ready to print. The middle position reduces pressure between the printhead and
the print paten roller for easier manual feeding. The up position lifts the
printhead off of the platen roller for manually inserting paper or for clearing a