Telpar MTP-600 Series, Руководство пользователя

Страница: 18 / 45

TELPAR MTP-600 Receipt Thermal Printer User Manual
MTP-600 User Manual – Part No. 090102-0010 (Rev. B – 6/03) Page 12
Name Command
ASCII
Command
+n
= data
byte[hex]
Description
ESC ESC [1B] ESC Sequence Header.
FS FS [1C] FS Sequence Header.
GS GS [1D] GS Sequence Header.
Set
Reverse
video print
mode ESC RS [1B 1E] Start reverse video printing. Reverse
and normal print can occur on the
same line. Line spacing between
character lines, spacing due to the
FF command, and spacing due to
the HT command do not print
reverse video. See ESC US.
Reset
Reverse
video print
mode ESC US [1B 1F] End reverse video field.
See ESC RS.
Set Print
mode ESC !
+n
[1B 21
+n
]
Set Print mode. See Section 4.2.7.1
- Set Print Mode.
Set Bit
Image
mode ESC
+m +n
1
+n
2
+d1
∼
d
n
[1B 2A
+m +n
1
+n
2
(data)]
Set Bit Image mode. 4.2.7.2. - Set
Bit Image Mode
Set 1/6”
line
spacing ESC 2 [1B 32] Set 1/6 inch line spacing.
Set Line
feed pitch ESC 3
+n
[1B 33
+n
]
Set single line spacing to n dot lines.
Printer
reset ESC @ [1B 40] Initialize. See Section 4.2.7.3 -
Printer Reset
Set line
spacing ESC A
+n
[1B 41
+n
]
Set line spacing to n dot lines.
Set Page
length ESC C
+n
[1B 43
+n
]
Set the page length to n character
lines. Range = 0 to 63dec. Default is
44 lines. ESC C 00hex resets the
page length and a FF command will
cause paper to be ejected, this
command should be used ONLY if
CUT SHEETS is selected as the
paper type.
Set
Horizontal
Tab
positions ESC D
+d
1
∼
d
n
NUL
[1B 44
(DATA)
00] Set from 1 to 32 tab positions. Data
values range from 1 to 255 in
ascending order. If a data value is
less than the previous data value,
this command is terminated. ESC D
NUL clears all tab positions. Default
is every 8 columns.