8
Configuring the outputs:
You can configure the control mode for the outputs in the
Outputs
menu.
When selecting the control mode, you can customize the parameters for opening
and closing impulses (A, B or X, Z), the interval for keeping the gate locked in
open state (Y), and the delay for intervention in the photocell loop (W), depending
on the control mode chosen.
Configuring cameras:
The
Gate Control PRO
can manage access up to two IP cameras with ONVIF
standard. They can be added in the
IP cameras
menu, by entering the URLs of
the cameras. You can enter either stream or snapshot URLs, and the mobile
application will display the camera images accordingly.
For extracting the URL from your IP camera, we suggest using our
IP camera
detector
software designed for this purpose. You can download the software
from our website under the
Software
tab on the
Gate Control PRO
product
page.
-> Chapter 5.2.4, 5.2.5, 5.2.6, 5.2.8 and 5.2.10 of the Installation and Application
Manual.
REGISTERING THE MOBILE APPLICATION:
The
Gate Control
mobile
application is available on the
following platforms:
–>
Minimal system requirements:
- Android: 4.1
- iOS: 7.0
By registering the
Gate Control PRO
device in the mobile application, besides
the mobile device, the user will also be added automatically in the device.
Thereafter, user permissions can be changed via the programming software,
or even via the mobile app by admins or super admins. If a user has been added
in the device via the programming software before registering his mobile app, for
the mobile app registration the user should use the user name added in the
programming software. Otherwise, a new user will be created upon registering
the mobile app.
