Telkom ADSL 5102G, Быстрый старт

Страница: 10 / 20

Quick Start Guide
8
Installation using Windows 98, 98SE, ME or NT4:
Connecting Your Telkom ADSL 5102G Router
(Hardware Installation)
Follow the installation instructions below, using the images provided and the overview sketch
(figure 3) and the corresponding letter indicators.
1. Power up the device
a) Plug the power adapter into the electrical wall-socket (A).
b) Plug the power pin-connector (male) into the router’s power socket (B).
c) Switch on the device.
d) Wait for approximately 20 seconds, then confirm that the “PWR” and “SYS”
LED’s (front panel lights) are steadily lit.
2. Connect the ADSL line
a) Connect one of the included telephone cables between the Telkom wall-socket
and one of the sockets on top of the integrated power and surge unit (C) .
b) Connect the other included telephone cable between the remaining unused
socket on top of the integrated power and surge unit and the router’s “LINE”
port
(D) .
A
B
C
D