WE866Cx Linux Companion RF Test User Guide
1VV0301640 Rev. 1
Page
19
of
34
2020-06-03
4.2.
QRCT WLAN Tx Test Procedure
Table 4-1, lists the Tx settings description.
Table 4-1 Tx Settings Description
To put the device in initial WLAN connect, perform the following steps:
1. Click
TX
2. Under
TX SETUP
, edit the WLAN Transmit settings as required.
Note: The selected settings can be saved in the form of
.xml
file for later use.
3. Click
SET TX ON.
4. Once the test run is successful, the following message appears.
