WE866Cx Linux Companion RF Test User Guide
1VV0301640 Rev. 1
Page
11
of
34
2020-06-03
2. HARDWARE TEST SETUP
This section describes the hardware test setup required to perform RF test using QRCT tool.
2.1.
Prerequisites
•
Two laptops:
o
One with Windows7/10 OS
o
One with Linux OS (x86 or i.MX Platform with Ethernet port)
•
WE866Cx EVB for Linux host
•
Rohde & Schwarz CMW500 RF Tester
•
RF cable to connect the WE866Cx module to RF tester
•
Three ethernet cables to connect the AP ( or Ethernet switch) to two laptops and
RF tester
Figure 2-1, WiFi RF Test setup.
Figure 2-1 WiFi RF Test Setup
DUT
