WE866Cx Linux Companion RF Test User Guide
1VV0301640 Rev. 1
Page
17
of
34
2020-06-03
#modprobe cfg80211
#insmod ~/WE866CX/rootfs-WE866Cx.build/lib/modules/wlan.ko
con_mode=5
#rfkill unblock all
#ifconfig wlan0 up
Step 6:
Configure QRCT tool in Windows Laptop
a.
Run the Qcmbr tool in your Linux laptop
# ./Qcmbr
b.
Launch the QRCT tool in your windows laptop and select the configuration as
shown below.
i.
Select
Target
type
AP_STATION_or_PCIe
from the drop-down list.
ii.
Select
DUT: IP
address (obtained from target platform; i.e, x86 laptop or
i.MX )
iii.
Click
Connect
iv.
Select
Category > WLAN
v.
Select
Chipset > QCA6174
vi.
Click
Connect
vii.
Next, under
MANUAL SELECT CHIP,
click
Chip Selection
viii.
In
Chip Selection
window, select
Chip > QC6174
ix.
Select
RFCal Data Source > File
x.
Select
WLAN Instance >Inst0
xi.
Click
Select BDF
to browse
bdwlan.bin
Telit provided. For example:
C:\Release\WE866CX\drivers\firmware\WLAN-
firmware\bdwlan.bin
xii.
Click
Establish Connection
