Jupiter SL869 EVK User Guide
1VV0301126 Rev.0 – 2014-01-23
Reproduction forbidden without written authorization from Telit Communications S.p.A. - All Rights Reserved.
Page 9 of 21
Mod. 0810 2011-07 Rev.2
2.
Preparing for the SL869 V2 EVK
2.1.
What is Necessary
To use the SL869 EVK, you will need:
1.
A PC with a USB port that fulfills the minimum software requirements
Windows XP or above
.NET Framework 2.0
2.
SL869 V2 EVK including SW and drivers stored into USB flash drive below
o
FTDI USB Driver
o
TPFs (Telit Power Flash) and one dll files
TPF_SL869_V2_GPS_Glonass_3.2_C33_00
TPF_SL869_V2_GPS_Beidou_3.6_C33_00
brom.dll
o
TelitGNSS monitor program SL869 V2 Ver1.1
2.1.1.
Installing the USB Drivers
Before connecting the SL869 EVK, install the necessary USB drivers
1.
Double-click the USB driver executable, “CDM20600.exe”, in the directory of
CDM20600 USB driver/ and follow the onscreen directions for installation.
2.1.2.
Installing the NI Drivers
Before running the SL869 V2 GNSS Monitor Program, install the necessary NI drivers
1.
Double-click the USB driver executable, “setup.exe”, in the directory of /GNSS
Monitor program/SETUP/ and follow the onscreen directions for installation.
