Jupiter SL869 EVK User Guide
1VV0301126 Rev.0 – 2014-01-23
Reproduction forbidden without written authorization from Telit Communications S.p.A. - All Rights Reserved.
Page 8 of 21
Mod. 0810 2011-07 Rev.2
1.4.
Text Conventions
Danger – This information MUST be followed or catastrophic equipment failure or bodily
injury may occur.
Caution or Warning – Alerts the user to important points about integrating the module, if
these points are not followed, the module and end user equipment may fail or malfunction.
Tip or Information – Provides advice and suggestions that may be useful when
integrating the module.
All dates are in ISO 8601 format, i.e. YYYY-MM-DD.
1.5.
Related Documents
SL869 V2 Product Description, 80433ST10605A
SL869 V2 Software User Guide, 1VV0301125
NOTE:
To prevent ESD and EOS damage, a properly grounded ESD wrist strap should be
worn when working inside the EVK
Do not alter shunt connectors while USB power is applied
Do not short the RF signal to ground if antenna voltage is installed. Damage to the
EVK may occur.
Always follow ESD safety precautions when utilizing the SL869 evaluation kit. For
additional information on the SL869, ask your local sales representative for additional
documentation.
