Jupiter SL869 EVK User Guide
1VV0301126 Rev.0 – 2014-01-23
Reproduction forbidden without written authorization from Telit Communications S.p.A. - All Rights Reserved.
Page 13 of 21
Mod. 0810 2011-07 Rev.2
5.
Flashing Firmware with TPF (Telit Power Flash)
5.1.
Flashing Requirements
Two kinds of TPFs are available for GPS+Glonass and GPS+Beidou with common dll file.
GPS+Glonass: TPF_SL869_V2_GPS_Glonass_3.2_C33_00
GPS+Beidou: TPF_SL869_V2_GPS_Beidou_3.6_C33_00
brom.dll
5.2.
Flashing Instructions
1.
Connect the USB connector and let the Host PC machine enumerate the USB connection.
2.
Enable SW1 to the upward state to power the SL869 V2 receiver.
3.
Launch the one of TPF for GPS+Glonass or GPS+Beidou, then COM port is
automatically selected. But if it is not, please set the COM port available.
4.
Click on the Flash button then FW upgrade is started.
5.
You will find the “Completed” message covered with green on the tab after finishing
upgrading.
6.
Click to off the tab, then verify the GNSS functionality with proper antenna,
GPS+Glonass or GPS+Beidou.
