IP-223 to RTS Intercom Products
8
AN-DISPATCH-035
3.1.4
Per Line Setup Window Line 2
The
Per Line Setup
window, shown in Figure 5, is used to setup the connection to
the RTS equipment. Depending on the connection to the RTS equipment, VOX or
COR triggering may be used.
To
configure an RTS supplied relay closure
, do the following:
1. Click
Per Line Setup
.
The Per Line Setup window appears.
2. Click
Line Select 2
.
The Per Line Setup window for Line 2 appears.
3. Select the
COR Enabled
check box on Line 2’s Per Line Setup window.
The RTS supplied relay is enabled.
4. Click
Submit
.
The Per Line Setup configuration is temporarily saved.
5. Click
Save to EEPROM
.
The EEPROM window appears.
6. Click
Save Parameters
.
All configurations are permanently saved to the IP-223 console.
FIGURE 5. Per Line Setup Window, Local Mode–Line 2
