IP-223 to RTS Intercom Products
18
AN-DISPATCH-035
5.1.2
Local IP-223 Per Line Setup Window Lines 1 & 2
Depending on the connection to the RTS equipment, VOX or COR triggering maybe
used.
To
configure an RTS supplied relay closure for a WAN/LAN system
, do the
following:
1. Click
Per Line Setup
.
The Per Line Setup window appears.
2. Click
Line Select 2
.
The Per Line Setup window for Line 2 appears.
3. Select the
COR Enabled
check box.
4. Click
Submit
.
The Multicast Address Setup configuration is temporarily saved.
5. Click
Save to EEPROM
.
The EEPROM window appears.
6. Click
Save Parameters
.
All configurations are permanently saved to the IP-223 console.
To
configure PTT with VOX for a WAN/LAN system
, do the following:
1. In the LAM Level dB field, enter the
level
in dB.
2. In the LAM Time field, enter
three (3) seconds
.
3. Click
Submit
.
The Multicast Address Setup configuration is temporarily saved.
4. Click
Save to EEPROM
.
The EEPROM window appears.
5. Click
Save Parameters
.
All configurations are permanently saved to the IP-223 console.
NOTE:
The recommended LAM level is -20dB to -25dB.
FIGURE 12. Per Line Setup Window WAN/LAN, Local Mode–Line 2
