IP-223 to RTS Intercom Products
AN-DISPATCH-035
15
5.0 WAN/LAN Remote Configuration Example
The Telex IP-223 Adapter Panel can be employed to provide access to remote radio devices over
a LAN or WAN. See Figure 10.
Receive audio from the LMR, or iDEN handset, is connected to the line’s I/O (DB-25) of the
remote IP-223. This audio is passed, via the IP network, to the corresponding line I/O of the local
IP-223. A PTT command, and audio, from the RTS keypanel, received at the local IP-223 line
I/O, are passed across the IP network to the remote IP-223. The remote IP-223 keys the radio
device and passes audio for transmission.
5.1
Local IP-223 Setup
The locally connected IP-223 must to be configured for local mode operation on both lines.
The Line Type and jumper settings should be appropriately configured for the device being
connected. The following example uses an iDEN handset.
NOTE:
The IP-223’s default username is
admin
and the password is blank.
REFERENCE:
For more information, see the IP-223 Technical Manual (P/N 803641) for
jumper settings relevant to the RTS equipment to be connected.
FIGURE 10. LAN/WAN Configuration Example
