IP-223 to RTS Intercom Products
22
AN-DISPATCH-035
6.1.1
Multicast Address Setup Window
To
configure the IP-223 for remote tone control
, do the following:
1. Click
Multicast Address Setup
.
The Multicast Address Setup window appears.
2. From the Line Type drop down menu for Line 1, select
Tone Mode
.
3. From the Line Type drop down menu for Line 2, select
Local Mode
.
4. Click
CRP Setup
.
The Crosspatch Setup window appears.
5. Select the
Enable Line-Line
check box (full stop).
6. Click
Submit
.
The Multicast Address Setup configuration is temporarily saved.
7. Click
Save to EEPROM
.
The EEPROM window appears.
8. Click
Save Parameters
All configurations are permanently saved to the IP-223 console.
FIGURE 15. Multicast Address Setup, Remote Tone Control Configuration
