7
ES
3. keyboard
The keyboard operation will depend on the current
working mode . See the table below:
Button
Main functions
Equipment Switch on / Switch off (press
and hold) .
Change the plane displayed on the screen
(X/Y) .
Perform test arc or re-arc .
Access menu and sub-menus .
Oven start-up .
Exit the menu ad get the engines back to
their initial position .
Perform splicing (when fibres are positio-
ned) .
Perform splicing (when fibres are positio-
ned) .
Move up .
Move down .
Move left .
Move right .
Confirm and access sub-menus .
4. Commissioning and menu description
To switch the fusion splicer on or off, press and hold the
key
.
Once switched on, press
to access the “Main menu” .
Once there, you will be able to access the different confi-
gurations .
Options
Description
Start
You need to access this menu to per-
form the splicing .
Splicing mode
Selection of fibre type and working
mode .
Oven mode
Selection of fibre type and working
mode .
Settings
Equipment configuration: language,
screen, power . . .
Memory
Displays fusion data and images .
Maintenance
Menu for use-based maintenance .
4.1 Start
For the equipment to perform the fusion, you need to
select this option .
4.2 Splicing mode
Scroll through the main menu until you reach the "Fusion
mode" option and press the
button to access it .
