ES
11
Settings
Description
Self-start
With this option enabled,
the equipment will start
splicing as soon as the
cover is closed . With this
option disabled, you will
need to push the
button to perform the
splicing process .
Pause 1
With this option checked,
the equipment will pause
after the first time fibres
are brought together .
Pause 2
During the splicing
process, the equipment
will pause again after the
fibres are correctly aligned
and before the arc for the
fusion is activated .
Reset on cover opening
With this option enabled,
the equipment will bring
the heads back to their
initial position once the
splicing has been carried
out and after the cover has
been opened . With this op-
tion disabled, you will need
to press the
button .
Cutting angle
With this option enabled,
the fusion splicer checks
the fibre's cutting angle to
verify whether the value
exceeds the factory-set
acceptable value (3°) .
Pérdida estimada
Si tiene esta opción activa-
da, la fusionadora revisa si
el valor de pérdida tras la
fusión es menor o mayor al
programado como acepta-
ble (valor de fábrica 0,10
dB) .
Estimated loss
With this option enabled,
the fusion splicer checks
whether the value of the
loss after splicing is lower
or higher than the factory-
set acceptable value (0 .10
dB) .
Blister
With this option enabled,
the fusion splicer will
display an error whenever
blisters are detected in the
fusion area, either due to
external elements or to a
bad adjustment of the arc
discharge .
Fibre thickness
With this option enabled,
the fusion splicer will
display an error whenever
the thickness of the spliced
fibre exceeds the standard
thickness .
No. of Re-arcs
Sets the number of
repeated arcs that can be
carried out for a single
splicing after the first arc .
This repeated arc is usually
carried out manually by
pushing the
button .
RST duration
Sets the delay for engine
restoration and tensile test .
The value “0” indicates the
engines are restored im-
mediately after the cover
is opened . The value “2”
indicates the engines will
be restored 2 seconds after
the cover is opened .
4.4.2 Power settings
This option allows you to configure the equipment power
values in order to manage power and optimize battery use .
You will be able to enable/disable the keyboard sound, the
inner light and the fan, and delay both the LCD screen and
the splicer switch off .
