Televes 596101 Скачать руководство пользователя страница 63

Страница: 63 / 65

Technical support

For any questions, contact Technical Support at
www.televes.com
Before contacting Technical Support for repair,

read the manual to ensure proper use and attempt

to RESET the unit to clear any problems.

Repair service

Do not return the unit without first contacting

Televes Technical Support.
If the unit needs to be returned, Televes will

arrange for free shipping. The unit will need to be

appropriately packed for shipping.
In compliance with IATA Regulations, when using

our shipping service follow these instructions:
• Label the package.
• The equipment should fit as snugly as possible

in the box. It is recommended to use the original
packing materials.

• Attach the precaution label to the package.

DO NOT LOAD OR TRANSPORT

PACKAGE IF DAMAGED

Lithium ion battery

Failure to comply with these shipping requirements

may result in the shipping agent rejecting the

package.

Warranty

Televes warrants, only to the original Purchaser, for

a period of one (1) year from the date of original

purchase, unless otherwise specified.
For the battery, due to the nature of the product,

the warranty period is six (6) months.
Keep the purchase invoice to determine the

warranty start date.
During the warranty period, Televes S.A. assumes

any defect in materials or workmanship.
This warranty excludes any inoperability resulting

from improper use, wear, service or repair

performed by any third party not authorized,

catastrophes or any cause unrelated to Televes S.A.

Содержание 596101


































































Результаты поиска

Содержание 596101

Отзывы:

Похожие инструкции для 596101

Бренды по названию

Популярные бренды

Televes 596101, Руководство пользователя

Результаты поиска

Содержание 596101

Отзывы:

Похожие инструкции для 596101

Бренды по названию

Популярные бренды