Televes 596101 Скачать руководство пользователя страница 34

Страница: 34 / 65

MOSAIQ6 Multi-touch Meter/Analyser

DiSEqC parameter (Sat A, Sat B, Sat C, Sat

D).

Positioner (only satellite band): makes it

possible to control the DiSEqC motors

used to move mobile parabolic antennas.

This function is available in satellite mode

and when the equipment is powering the

LNB.

Halt: This command stops the motor

movement.

East: Allows to move the motor in the

EAST direction. Each click corresponds to

one step in the movement of the motor

(pitch motors). By holding the key down,

successive movement sequences will be

executed until the key is released.

West: Motor movement in the WEST

direction. Each click corresponds to

one step in the movement of the motor

(pitch motors). By holding the key down,

successive movement sequences will be

executed until the key is released.

Store: 8 storage positions are available

to store at up to 8 antenna positions . This

command allows one of 8 positions to be

chosen where the current position of the

antenna will be stored.

Goto: recovers one of the 8 positions

for the antenna that has been previously

stored

SCR (only satellite band): Selects the SCR

parameters (multiswitch, standard and

slots) When a slot is enabled (for example

slot 3, freq. 1210MHz), the meter will tune

into the slot frequency (1210MHz) and

will set the slot with the meter parameters:

frequency, band (powering), and DiSEqC.

In addition, a SCR icon will be shown in the

bar at the top (SCR3) to indicate that the

slot is enabled. While the slot is enabled,

all the setting changes of the meter, will

be applied to the currently slot (SCR3).

CTB (only analog channels): Turns ON/OFF

the CTB measuremnt. If you select CTB ON,

a popup window will be displayed asking

you to turn the signal off. CTB can only be

made with the service disabled, because it

is a measurement made in the frequency

of the video carrier of the TV signal. Turn

the signal ON again to measure CTB and

all other measurements properly.

CSO Offsets (only analog channels): The

CSO measure is carried out in different

frequencies (at different distances from the

video carrier) within the selected channel.

Using this menu you can select the offset

where you want to measure the CSO, and

you can save up to 6 offset values, that can

be the default values or user-selected ones.

6.4.5.- Spectrum (RF Input)

This feature shows the spectrum of the signal.

6.4.5.1.-Main window

Power or C/N

measurement.

Tap to change

Spectrum

parameters

Swipe to tune next/previous channel

Drag to tune any channel

Spread/Pinch to change span

Tap to enable/disable marks

Содержание 596101


































































Результаты поиска

Содержание 596101

Отзывы:

Бренды по названию

Популярные бренды

Televes 596101, Руководство пользователя

Результаты поиска

Содержание 596101

Отзывы:

Бренды по названию

Популярные бренды