Televes 596101, Руководство пользователя

Страница: 31 / 65

EN
31
30
Halt: This command stops the motor
movement.
East: Allows to move the motor in the
EAST direction. Each click corresponds to
one step in the movement of the motor
(pitch motors). By holding the key down,
successive movement sequences will be
executed until the key is released.
West: Motor movement in the WEST
direction. Each click corresponds to
one step in the movement of the motor
(pitch motors). By holding the key down,
successive movement sequences will be
executed until the key is released.
Store: 8 storage positions are available
to store at up to 8 antenna positions . This
command allows one of 8 positions to be
chosen where the current position of the
antenna will be stored.
Goto: recovers one of the 8 positions
for the antenna that has been previously
stored
- SCR (only satellite band): Selects the SCR
parameters (multiswitch, standard and
slots) When a slot is enabled (for example
slot 3, freq. 1210MHz), the meter will tune
into the slot frequency (1210MHz) and
will set the slot with the meter parameters:
frequency, band (powering), and DiSEqC.
In addition, a SCR icon will be shown in the
bar at the top (SCR3) to indicate that the
slot is enabled. While the slot is enabled,
all the setting changes of the meter, will
be applied to the currently slot (SCR3).
6.4.2.- Services
This features shows a graph with the distribution of
the services os the channel. Tapping on one of the
sections of the graph, you can see the name of the
corresponding service.
If you see this feature in full screen, you will have
more detailed information.
6.4.2.1.- Main window
6.4.2.2.- Options context menu
• Quality profile: allows to select the quality profile
• Powering:
- VDC: Selects the preamplifier powering.
- DiSEqC (only satellite band): selects the
DiSEqC parameter (Sat A, Sat B, Sat C, Sat
Distribution and
bitrates of the service
PIDs
Graph with the
distribution of the
channels services
List of services with ID, the LCN
(for DVB channels)or the Virtual
Channel (for ISDB-T channels), the
service name, and bitrates. The
color of the squares corresponds
to the color of the section in the
graph
Service PIDs. The colors of
the squares indicate the
PID type