Televes 596101 Скачать руководство пользователя страница 23

Страница: 23 / 65

• Calibrate: select the wavelength (tap on the
graphic or on the list) and tap on this button to
calibrate it.
• Units: mW/µW, dBm.

4. Satellite identification

This feature is able to detect automatically the

satellite the input signal belongs to.

4.1.- Main window

Once the satellite is

identified, the name is

shown in the display

The Mosaiq6 adjusts automatically all

the paramenters of the spectrum

4.2.- Options context menu

• Powering:

VDC: Selects the preamplifier powering.

DiSEqC (only satellite band): selects the

DiSEqC parameter (Sat A, Sat B, Sat C, Sat

D).

Positioner (only satellite band): makes it

possible to control the DiSEqC motors

used to move mobile parabolic antennas.

This function is available in satellite mode

and when the equipment is powering the

LNB.

Halt: This command stops the motor

movement.

East: Allows to move the motor in the

EAST direction. Each click corresponds to

one step in the movement of the motor

(pitch motors). By holding the key down,

successive movement sequences will be

executed until the key is released.

West: Motor movement in the WEST

direction. Each click corresponds to

one step in the movement of the motor

(pitch motors). By holding the key down,

successive movement sequences will be

executed until the key is released.

Store: 8 storage positions are available

to store at up to 8 antenna positions . This

command allows one of 8 positions to be

chosen where the current position of the

antenna will be stored.

Goto: recovers one of the 8 positions

for the antenna that has been previously

stored

SCR (only satellite band): Selects the SCR

parameters (multiswitch, standard and

slots) When a slot is enabled (for example

Содержание 596101


































































Результаты поиска

Содержание 596101

Отзывы:

Бренды по названию

Популярные бренды

Televes 596101, Руководство пользователя

Результаты поиска

Содержание 596101

Отзывы:

Бренды по названию

Популярные бренды