PRISM MPI2-25 and MPX2-25 Media Analysis Platform User Manual
46
Select DOLBY:
a.
In the Dolby Audio Channel Pair menu,
select the audio channel
pair that contains Dolby audio.
Dolby audio in the selected channels are then decoded. Only
Dolby E decode is supported.
b.
Select
Save
and close the menu.
NOTE
.
Audio programs configured in the Program Configuration menu are used to
select a program for measurement by the Loudness application, to display audio
bars in the Audio application, and to monitor with headphones. When all the
channels are unassigned, all the channels are treated as stereo pairs. The audio
programs in the Dolby E stream are automatically set up based on the Dolby E
metadata.
To rename a signal input.
1.
Select the
Name
box to open the text editing display, as shown in
Figure 32
.
Figure 32: Renaming a signal input
2.
Use the editing controls to enter a new name for the input. Some notes on
using the text editor:
o
Enter a name with a maximum of 16 characters.
o
Use the
icon next to the input box to clear the existing name.
Use the
shift
key to access capital letters.
o
Use the
backspace
key to delete characters by backspacing over them.
o
Use the
123-abc
key to change between accessing letters and
numbers/symbols.
3.
When you are done editing the input name, select the
Enter
key.
4.
When you are done editing the input, select
Save
to save your changes.
